1-800-881-9044
 Proudly Made in the USA!
EMAIL

Where your comfort is our priority
We manufacture sinks that make sense!
Leading the industry since 1999

Stainless Steel Custom Sinks
We can fit existing cut outs!
After 10 years of searching, we have found the best stainless steel cleaner and conditioner - the only one approved by the EPA.  Great for appliances, sinks and virtually anything made of stainless steel. Click here to visit our manufacturing web site.

The sink above is our comfort sink shown as a single bowl. It features one of our exclusive artistic finishes called Drifting Spirit. We have commissioned a local artist to apply this beautiful permanent finish to the aprons of our sinks.

Sinks that make sense start with a large bowl. Double bowl sinks, for the most part, are obsolete. Center drains are obsolete as well. We recommend a rear right or rear left drain so you can place a roll-out trash mechanism below the sink (where most of the trash is generated.)

 

CHECK OUT OUR PRICING!!!!

Our single bowl undermount sink (above) up to 30" wide is only $1422 - featuring zero radius corners, 16 gauge construction,  and right rear drains. Our price is lower than mass produced zero radius sinks!
This is a Blanco 18 gauge (thinner) zero radius sink with a rear center drain (not such a great location for a drain) Their retail price is $1425.

Looking for a drain board sink? We have them. You can have one made with ribs as shown, or with a smooth tapered look.

 

Stainless Apron Sink totally hammered


Hammered undermount with radius for faucet.

This is one of our many patented sink designs. It features a partially offset drain which will allow you to place a large cookie sheet in the sink and still have access to the drain. The drain can be rear center, right rear or left rear for your convenience. (below)

Custom Stainless steel sink with curved front to match curve of sink cabinetry.


Hammered stainless apron sink

This is the solution to a corner sink cabinet!

See a custom angle double bowl sink that was made perfectly to fit the angle of the cabinetry. This was all done over the phone and by email.

We are often asked if we can hammer stainless. We can, and this is a photo of a hammered apron on a stainless sink.

Custom lavatory sink designed to be integrated into a stainless steel countertop by owner.
 

Yes, we build double bowl sinks and even triple bowl sinks. Please let us tell you about all of the tremendous advantages of single bowl sinks.

Looking for a good solution for a corner sink? Feast your eyes on this one. The old fashioned designs for a corner are nothing but useless and difficult to work in. We believe our solution offers a great way to work in a corner kitchen design. (above)

Do you have a special need? This sink was designed for a yacht. (left) We can craft special sinks for aircraft as well. Most any shape and design is possible. Just ask.

We will send you detailed drawings of the proposed sink for your approval.

We frequently receive requests to fit an existing cutout in a granite top. Please ask us to help!

Undermount double bowl features rear center drains. Who thought up the idea for a center drain? There is no need for a drain dead center of your sink. At least move them to the rear so you have some work space.  

Our textured "Millennia" stainless steel is the way of the future. It hides scratches and water spots. If you are considering stainless steel, this is the way to go!  The Millennia textured stainless steel apron sink is the king of sinks. It not only looks good the day you get it, but it will continue to look good!

Stainless steel apron front sink with towel bar. The towel bar was made using the handle from a refrigerator.

We mean custom when we say custom. This sink was a special request by one of our dealers.



Undermount Millennia single bowl sink - photo sent in by customer.

Custom Millennia textured stainless steel sink with a deck for a faucet built into the sink.


Millennia textured stainless apron front sink.

We now offer fitted cutting boards for our undermount sinks. They are available in maple, cherry, or walnut. The woods can be mixed too, as shown in the photo on the left. The pictured cutting board is a mixture of maple and walnut. We are having these made by Dutch Mills Cabinetry of Goshen, Indiana - one of the finest cabinet makers in the industry.

This photo features our Millennia Textured stainless steel sink.

This under mount stainless steel sink features a drain board with an extra deep drop on the left side.